- THE HYDROFLUX GROUP
- Our Team
- News & Media
- Contact Us
Frequently Asked Questions – Hydroflux HD-DAF – Industrial Dissolved Air Flotation System
What is the capacity of the range of HyDAF dissolved air flotation systems?”
The HD range of HyDAF dissolved air flotation systems are designed for industrial applications where high solids loads are usually experienced. We have standard sizes that we manufacture but in each case we determine the most suitable model and dissolved air recycle system to suit the specific wastewater characteristics.
“Is the HyDAF dissolved air flotation suitable shopping centres and food courts?”
Yes, but we have designed a GT range of dissolved air flotation systems specifically suited for treatment of wastewater from shopping centres and foods courts. Please click here to be directed to the GT-DAF pages.
“Can the HyDAF dissolved air flotation system handle variable load and flows?”
This depends. In applications where chemicals are not being used, the HyDAF dissolved air flotation system can operate and effectively treat wastewater at any flow and solids load up to its design capacity. If chemicals are being dosed, then variations in flow and solids load will adversely effect the chemical process. In these cases, the installation of a balance tank upstream of the HyDAF dissolved air flotation and a constant feed rate is recommended.
“Do I need to dose chemicals into the wastewater?”
Dosing of chemicals into the wastewater upstream of the HyDAF dissolved air flotation system will improve the performance of the system. Whether it is necessary to dose chemicals depends on the water quality that is required. Hydroflux can tailor specific chemical programs to ensure performance requirements are met economically whilst minimising the amount of sludge that will be generated. For more information on our chemical division, please click here for information on our support services.
“How much sludge will the HyDAF dissolved air flotation system generate?”
The amount of sludge generated depends on the amount of solids being removed and also whether chemicals are being dosed to enhance the performance of the HyDAF dissolved air flotation system. The dry solids concentration in the dissolved air flotation system sludge can be up to 10%. You can estimate the amount of sludge that will be generated by multiplying the solids load by the daily flow or alternatively give us a call and we will be able to assist. In larger applications the installation of a sludge dewatering plant will be highly economical. Please click here for information on our range of dewatering systems.
“What is the performance of the HyDAF dissolved air flotation system in terms of pollutant removal?”
The treated water quality depends on the nature of the raw wastewater and the chemical process that is applied. In many industrial applications, the HyDAF dissolved air flotation system can remove over 99% of solids and grease which will result in quite significant reductions in BOD and COD. Nutrients and metals can also be removed using the HyDAF dissolved air flotation process. .
“Does the HyDAF dissolved air flotation system require much power?”
Compared to the overall power requirements of a compelte wastewater treatment plant, the power demand for the actual HyDAF dissolved air flotation system is minimal. The dissolved air recycle pump draws the most power and is fitted with a motor ranging from 4 kW to 30kW depending on the size of the system.
“Can the HyDAF dissolved air flotation system system handle large solids?”
It can but large solids can cause blockages and increase the chances of sedimentation occurring. In industrial applications we normally recommend the installation of a 1 -2 mm screen be installed upstream of the HyDAF dissolved air flotation system. For information on our range of screens, please click here.
“Is the HyDAF dissolved air flotation system easy to maintain?”
Yes the system can often be maintained by in-house personnel. Mechanically the HyDAF dissolved air flotation system rarely fails, the most common cause of poor performance is due to chemical programs malfunctioning which is usually due to changes in raw wastewater characteristics. Hydroflux can offer a service and preventative maintenance program if required via our support services. Please click here for more info.
Please click on one of the links below for additional information or the tabs for photos, drawings, case studies and brochures:
- Key Features that make the Hydroflux HyDAF unique – Click Here
- HD-V. V Bottomed DAF designed for automated removal of settles solids – Click Here
- Sustainable Saturation, the simplest and most efficient saturation system available – Click Here
- Standard Sizes – Click Here
- Common Applications – Click Here
- Typical DAF process – Click Here
- FAQ’s – Click Here
Hydroflux product solutions are fully equipped, ready for operation. This complete offer allows clients to consider the best technical solutions available via the most efficient process